Kelvin clip 3Z

for wire connections, feeders and plates

The “small” Kelvin clipper 3Z is Clips mdesigned to connect to free ends of windings and wire connections, busbars, feeders and plates. This robust measuring clipper is of a twopole design so that a 4-pole connection of the test object according to Kelvin can be realised using two clippers. Thus, any influence of the supply line and contact resistances on the result of a resistance measurement is avoided. Of course, you can also use the Kelvin clipper 3Z for other measuring tasks, provided the max. allowable current is not exceeded.

The Kelvin clipper has a symmetrical design, i.e. there is no difference – as regards a resistance measurement -between the current and voltage contacts, so that the user does not have to worry if the Kelvin clipper is reverse – connected to the wire or test object. Different Kelvin clipper designs are available, which mainly differ with regard to the size, the length and the type of the connected cable as well the plug(s) used. The design and the surface of the contact matrixes (standard: transverse grooves as protection against slipping off) can also be custom-made.

Technical Data:

Front opening widthca. 10 mm
Contact width6 mm
Matrix length15 mm
Cable diameter0.3 mm – 8 mm
Contact pressure> 2 kp ( 20 N)
max. current10 A
Matrix / Handle materialhard brass / shock - resistance plastic
Matrixspecial designs upon request
Dimensions90 x 35 x 13 mm (WxHxD)
Weightapprox. 40 g without cable

DIN EN ISO 9001:2008

Don’t hesitate to get in touch! We’ll be glad to provide you with technical assistance as well as provide you with any needed information regarding features, prices, shipment & reselling.

phone: +49 (0)3328 / 3179 – 0
fax: +49 (0)3328 / 3179 – 10
email: sales@schuetz-messtechnik.com

Kelvin Clip 5Z
Kelvin test prod 4P