PWD 2000 Al-Co W/A/L

Cable holding device featuring Water flow or reposing Air system

The precision holding device PWD2000/P is used for the determination of the electric resistance per meter of power and medium voltage cables/conductors in AL/CW

PWD 3000 Cu / Cu-Al

Cable holding device featuring water flow system.

This special holding device allows high precision cable resistance measure­ments on stranding machines even all main parts of it (the compactor, the capstan and the cable take-up mechanism ) are grounded! No necessity for isolating machine parts!

MAT 2000 T

Cable measuring tool with electric lifting device.

The MAT 2000 T is used for determination of electrical conductor resistance per 1000 m. (US version: per 1000 ft.) High current and medium voltage cables.

MAT 1000

Cable measuring device for 0.1 mm² to 100 mm².

The measuring device MAT1000 is used to measure the electrical resistance of cable, wire and other material samples in the incoming goods control, production monitoring and quality assurance.

ML 1000

for extremely thin wires – from 0.03 mm to 3 mm

This resistance measurement holding device is used for the measurement of the electric resistance of samples of cables, wires or other material for inspection of incoming goods, manufacturing control applications and quality control.

MR 300 C-A

For extremely low impedance objects.

Highly accurate resistance measurements at extremely low impedance objects such as cables, contacts, fuses, power connections, graphite, coal as well metal samples...

MR 270 C-A

Especially for the cable industry.

This MICRO-OHMMETER is specifically designed for measurement of electrical resistance in the cable industry and measuring inductive loads (transformers, motors)...