Transformatoren & Motore

PWR1-3B Ratiometer 3-PHASE

for Power- and Distribution- Transformers

The RATIOMETER PWR1-3B is constructed to measure the transformation ratio, phase error and magnetizing current of power- and distribution- transformers for all three-phases simultaneously. Voltage and current transformers are single phase, power transformers normally three-phase. Due to the bad quality on industrial lines (phase jitter and shifting, voltage differences between the three phases) all measurements normally are done single phase, even on three phase ratiometers.

The design of the PWR1-3B contains an internal sinus power oscillator which delivers the necessary exciting voltage with very low distortion and stable voltage not found in industrial lines. This allows very stable and precise single- and three-phase measurements.

The Ratiometer PWR1-3B uses a large LCD display with backlight to present the values of ratio and phase difference of “H.V. Winding” to “L.V. Winding” , and the excitation voltage and the magnetizing current of the high voltage winding.

The instrument performs self calibration and different warning messages before each measurement in case of reversed connections and other failures. The instrument is battery-powered but can be driven by normal line voltage, too. A built-in printer is optional. Two test voltages can be preselected. A tap changer connection allows the forward changing of the tap changer automatically.
The ratio range is selected automatically, too.

DIN EN ISO 9001:2008

Don’t hesitate to get in touch! We’ll be glad to provide you with technical assistance as well as provide you with any needed information regarding features, prices, shipment & reselling.

phone: +49 (0)3328 / 3179 – 0
fax: +49 (0)3328 / 3179 – 10